Autonatomy · ADAS Instructor Lab Center

AUTONATOMY · ADAS INSTRUCTOR LAB PACKET

Instructor-only educational form. This page does not connect to a scan tool, run calibration, verify a repair, certify a technician, or authorize vehicle release. Follow current, applicable vehicle-specific OEM information; a trained instructor must supervise real work and sign the printed record. The page does not automatically save entered information. Avoid entering customer identifiers.

Vehicle-specific practical assignments · v99

Use these printable, instructor-led training worksheets alongside the full 14-criterion observation record. They are not OEM procedures or automatic credentials.

ADAS-P01 · Forward-Camera Service ADAS-P02 · Front-Radar Service After Collision ADAS-P03 · Post-Alignment ADAS Review

01 · Vehicle-specific lab setup sheet

Use a school-owned or otherwise authorized training vehicle. Enter the exact OEM source in the actual work record; no brand-agnostic targets, measurements, time limits or static/dynamic method are supplied here.

Training session ID (no VIN/customer details)Training dateLearner / training groupInstructor / siteTraining vehicle / identified ADAS systemService event / authorized assignmentCurrent OEM procedure title, reference, revision, and required related operationsApproved tools, targets, access, power support and service softwareRequired workspace, conditions and qualified supervisionPermitted task scope, stop-work triggers and escalation contact

Readiness gates

For this educational checklist, every gate must be marked confirmed before beginning an applicable real-vehicle task. “Not checked” and “Unmet” both require review; a confirmed gate does not independently authorize work.

8 readiness gates not yet reviewed.

02 · Instructor-observed practical record

All 14 original checklist criteria are presented here. Select Met only for performance you personally observed under the relevant OEM/shop requirements; select Needs work for correction, or Not observed / not applicable and explain the limit. Unchecked is not a pass.

14 criteria not recorded. No practical pass has been issued.

03 · Remediation and separate reassessment

Needs-work and unobserved criteria appear here with editable coaching actions, practice conditions, an evidence plan and a separate reassessment result. The first observation is preserved on this page until you reset it; retesting does not overwrite the original selection.

Planned supervised practice / new prerequisitesReassessment date, instructor and physical work conditionsUnresolved safety issues, service restrictions, and referrals

Reassessment is not automatically a practical pass.

04 · Instructor disposition and record references

Physical service evidence references (OEM document, scan output, setup/measurement sheet, supervised observation notes)Instructor's scope-limited written disposition (what was actually demonstrated; what remains open)Next action / referralTraining record reference / secure storage location

Instructor signature / date (sign printed record)

Learner acknowledgement / date

Record boundary: Instructor observation is not an OEM credential, license, legal authorization, service invoice, calibration certificate, validated customer work order, or vehicle-release decision. Any actual service evidence belongs in the authorized shop system.

Return to separate online assessments

This packet is session-only: no browser-local storage, backend, learner account, electronic signature, or automatic grade is generated. Print or save the completed packet before leaving this page.